3 Ways To Install Functional Plumbing To Gutter Rain Collection Systems
Rain collections vary in size and cost, as well as the features that you have installed with them. With larger systems, you may want to have filtration and plumbing installed to give you more functionality and uses for your water resources. Functional plumbing can be used for irrigation and other needs around your home. The plumbing installation of your rain collection system can be gravity-fed, use a pump, or have a manual system. Here are some of the ways you can install functional plumbing with your rain collection system:
1. Simple Raise Rain Barrels That Have Gravity-Fed Plumbing for Irrigation
Raising the rain barrels for your collection system is a great way to create plumbing for irrigation systems. Gravity will allow water to drain to the irrigation lines for your garden. The amount of pressure this gravity-fed system produces will depend on the height of the barrels; if you have the barrels raised higher they will have more pressure, which will allow for a larger irrigation system. This solution works great for low-consumption systems, such as drip irrigation and soaker houses. Usually, there will not be enough pressure to operate sprinklers with this type of system.
2. Solar-Powered Pumps for Larger Water Storage Systems That Include Filtration
If you need a larger irrigation solution, you will want to have high-capacity tanks installed. These will give you more storage for water but will require more complicated plumbing for irrigation and other needs. For larger systems, solar panels are a good choice. With a solar panel, you will be able to install water pumps that allow you to connect your rain collection system to different types of irrigation systems. This type of system will also allow you to use sprinklers if you have a pump with enough power to provide the necessary pressure for sprinklers.
3. Ram and Manual Pumps to Use Stored Rain Water When You Need It
There are also a couple of options that you may want to consider for plumbing that does not need pressure. A manual pump can be installed if you have a small rain barrel and only need the water for light irrigation and a few outdoor tasks. Another solution that does not require power is a ram pump, which can be used for drip irrigation or to transfer water to raised tanks where it can then be used for gravity-fed irrigation systems.
These are some of the ways you can install functional plumbing with your rain collection system. If you are ready to improve your home's water resources, contact an irrigation service and talk with them about some of these solutions. Companies like Hydrotech Irrigation Co can offer more information.
Share